Jet Fuel (JP54) 

Kerosene-type high-quality kerosene product used primarily as fuel for commercial turbojet and turboprop aircraft engines

Fuel Oil 6 Supply – We have an Ongoing Supply – 6 Fuel Oil – Direct From Louisiana Refineries

Fuel oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking, fuel oil is any liquid petroleum product that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 °C (104 °F) and oils burned in cotton or wool-wick burners. In this sense, diesel is a type of fuel oil. Fuel oil is made of long hydrocarbon chains, particularly alkanes, cycloalkanes and aromatics. The term fuel oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil, heavier than gasoline and naphtha.


Aviation turbine fuels are used for powering jet and turbo-prop engined aircraft and are not to be confused with Avgas. Outside former communist areas, there are currently two main grades of turbine fuel in use in civil commercial aviation : Jet A-1 and Jet A, both are kerosene type fuels. There is another grade of jet fuel, Jet B which is a wide cut kerosene (a blend of gasoline and kerosene) but it is rarely used except in very cold climates.


Jet A-1 is a kerosene grade of fuel suitable for most turbine engined aircraft. It is produced to a stringent internationally agreed standard, has a flash point above 38°C (100°F) and a freeze point maximum of -47°C. It is widely available outside the U.S.A. Jet A-1 meets the requirements of British specification DEF STAN 91-91 (Jet A-1), (formerly DERD 2494 (AVTUR)), ASTM specification D1655 (Jet A-1) and IATA Guidance Material (Kerosine Type), NATO Code F-35.

JET A        

Jet A is a similar kerosene type of fuel, produced to an ASTM specification and normally only available in the U.S.A.  It has the same flash point as Jet A-1 but a higher freeze point maximum (-40°C). It is supplied against the ASTM D1655 (Jet A) specification.


Jet B is a distillate covering the naphtha and kerosene fractions. It can be used as an alternative to Jet A-1 but because it is more difficult to handle (higher flammability), there is only significant demand in very cold climates where its better cold weather performance is important. In Canada it is supplied against the Canadian Specification CAN/CGSB 3.23

We do not DEAL WIT LONG BROKER CHAINS, time wasters and if you are one of them please do not contact us. 

To initiate any Fuel Supply, D2 DIESEL / JP54 request, buyer must first send us an (LOI) indicating the product you want to purchase. This enables us to source and get the best pricing for your request. Please, include in your LOI for D2 / JP54 JET FUEL  the following informations :

  1. Description of type of business your company is engaged in / Key Personal
  2. Product / Qty Needed
  3. Delivery Method
  4. Intended destination of products 

Avenue Jean-Paul II – Immeuble Africaine des Assurances

01 BP 4825 – Cotonou, République du Bénin



Office : +229 21 30 18 48 

  Cel.  : +229 95 86 26 26

2017 Shekina Petroleum. All Rights Reserved.